触摸卡系列产品

触摸卡系列产品

EG-PCBA-3

  ShenZhen Ever Glory Photoelectricity Co.is based on the chip EXC3188 of EETIThis touch panel controller provides the optimistic performance of your projected capacitive touch panels. It communicates with PCsystem directly through USB/UART connector. You can see how superior the design is in sensitivityaccuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operation systems as following.

 

 

USB/RS232 Type Controller
Circuit Board Dimension 50mm x 100mm
Channels of Panel Max. Tx:48 Rx:80 channels (exclude shielding pin)
Input Voltage 3.5V~5.5V.Typical 5V.
Operating Temperature -40 to 85
Storage Temperature -40 to 90
Relative Humidity 95% at 60 , RH Non-condensing
Linearity(Note 1) Line drawing accuracy :
  1pt +/- 1mm offset /10mm
  Touch (point) accuracy : 1pt +/- 1mm
  Refer to Windows 8 Logo regulation
Interface USB: 1.1 Full Speed
RS232: No parity,8 data bits,1 stop bit, baud rate 19200bps
Resolution 4096´4096 resolution
Power consumption(mA) Active Mode: < 100mA
Idle Mode : < 50mA
Report rate(points/sec) 100 Hz
(Note 2)
Response time Average < 25 ms